>
Correction/Laser Project
Cours gratuits > Forum > Forum anglais: Questions sur l'anglais || En basCorrection/Laser Project
Message de edward635 posté le 05-05-2013 à 19:58:53 (S | E | F)
Bonjour,
Je souhaiterais que l'on vérifie l'orthographe et la grammaire de mon travail s'il vous plaît? C'est sur mon projets BAC (STI2D).
Thank you for your help.
REMOTE CONTROLLER LASER PROJECT
Presentation of my project :
In the auditorium, there are materials for light animation, equipments are placed very high and they are not accessible for the enlightener. The laser have a dipSwitch to select operating mode. So we can change operating modes just with scaffolding. But with the scaffolding we take risks because we can fall. Therefore we will modify the system of dipSwitch. We put a system of comand remotely without wires using InfraRed remote controller to change the operating mode.
Technical solution :
There are two technical solutions for this project :
- For starters can evolve the system with a technical solution that works on dipSwitch of the laser. To clarify with a slang system button on the dipSwitch.
- Or then a electronic solution that it should remove a dipSwitch and to adapt an aditional card existing system.
The best solution is the electronical solution, because the mechanical solution would require the electronic and we know that the electronic link to the mechanics are difficult to link to the electronic of electronic.
iREMOTE CONTROLLER LASER
The name is most clear in describing the system and more meaningful to the lighting design. When they hear the name of the product, they understand what is the system develop without explanation. Therefore it is a good way to sell the product.
Patents Search(INPI) :
Through research on the INPI website stinks we observed that no patent was drop for this system.
-------------------
Modifié par lucile83 le 05-05-2013 20:29
Message de edward635 posté le 05-05-2013 à 19:58:53 (S | E | F)
Bonjour,
Je souhaiterais que l'on vérifie l'orthographe et la grammaire de mon travail s'il vous plaît? C'est sur mon projets BAC (STI2D).
Thank you for your help.
REMOTE CONTROLLER LASER PROJECT
Presentation of my project :
In the auditorium, there are materials for light animation, equipments are placed very high and they are not accessible for the enlightener. The laser have a dipSwitch to select operating mode. So we can change operating modes just with scaffolding. But with the scaffolding we take risks because we can fall. Therefore we will modify the system of dipSwitch. We put a system of comand remotely without wires using InfraRed remote controller to change the operating mode.
Technical solution :
There are two technical solutions for this project :
- For starters can evolve the system with a technical solution that works on dipSwitch of the laser. To clarify with a slang system button on the dipSwitch.
- Or then a electronic solution that it should remove a dipSwitch and to adapt an aditional card existing system.
The best solution is the electronical solution, because the mechanical solution would require the electronic and we know that the electronic link to the mechanics are difficult to link to the electronic of electronic.
iREMOTE CONTROLLER LASER
The name is most clear in describing the system and more meaningful to the lighting design. When they hear the name of the product, they understand what is the system develop without explanation. Therefore it is a good way to sell the product.
Patents Search(INPI) :
Through research on the INPI website stinks we observed that no patent was drop for this system.
-------------------
Modifié par lucile83 le 05-05-2013 20:29
Cours gratuits > Forum > Forum anglais: Questions sur l'anglais
